To purchase discounted products, add the main product to your order, then use the listed coupon code. In the rare situation that I’m out of stock on the discounted product, I’ll contact you to arrange a refund or convert your order to the full-price item.
If you find that a product is unusable or damaged in a way you didn’t expect, let me know.
- General categories
- 25% off: A minor cosmetic issue that doesn’t affect the functionality, such as a scratch. Or, a previous version that’s nearly identical to my current version, with a few tweaks.
- 50% off: A cosmetic issue that’s obvious, but can probably be hidden during use, such as a chipped edge. Or, a previous version that is fundamentally the same as my current version, but I’ve made some significant tweaks.
- 75% off: A cosmetic issue that’s obvious and plainly visible during use. Or, a previous version or prototype that should be functionally complete, but may differ significantly from my current products.
- 90% off: Smaller parts of larger products, early prototypes, and items that are significantly damaged but have some useful components. Each instance of this discount level has a unique reason.
Game
|
Product
|
Discount
|
Coupon Code
|
Available
|
Condition
|
---|---|---|---|---|---|
Battlestar Galactica | Civilian Ships | 75% | BSG75 | 5 | I don't remember why these are in my discount pile; probably shallow engravings or mismatched sets of ships. They should all contain at least 12 ships. |
Betrayal at House on the Hill | Box Insert | 50% | BHH50A | 1 | I've made some changes to the design, such as adding a space for Post-It Notes, and making the whole design compatible with Betrayal at Baldur's Gate. This insert was in my personal game box for a while, nothing wrong with it. Fully assembled. |
Betrayal at House on the Hill | Trait Trackers | 50% | BHH50B | 4 | Misaligned engraving, so that the numbers are a little too close to the edge on one side and a little too far on the other. Functionally fine. |
Betrayal at House on the Hill | Trait Trackers | 75% | BHH75 | 5 | I didn't engrave the backsides of these trackers; as a result, they can't form a shell around each pentagonal player board. They still work just fine as an overlay. |
Clans of Caledonia | Overlay 4-pack | 75% | CLAN75 | 1 | These are the four prototypes I made before getting everything perfect. They're all functional; I just kept fiddling with the exact size of some spaces. Add 4 overlays to your cart, then use this coupon. |
Pocket Imperium | Game Frame | 75% | POCKET75 | 1 | You'll get two frames: one where the fit was a little tight, and one where it was a little loose. Both are good enough to use. |
Red Dragon Inn | Player Board | 25% | RDI25A | 10 | The plywood had a knot which was removed and replaced with a patch. Purely a cosmetic issue. https://hackadaycom.files.wordpress.com/2016/04/patchz.jpg |
Red Dragon Inn | Player Board | 25% | RDI25B | 10 | The engraving wasn't centered correctly, and the border is visibly larger on one side than the other. Otherwise, looks good and fully functional. |
Red Dragon Inn | Player Board | 50% | RDI50 | 10 | A small bit of the engraving on the front chipped away, or one of the edges didn't cut through completely and ended up ragged on the back. |
Roll for the Galaxy | Dice Guide set of 5 | 75% | RFTG75 | 5 | This 5-pack has a mix of minor cosmetic issues, mostly around the gluing process; a couple have glue that got in the wrong places, and a couple have a front plate that's barely misaligned. All functional. I don't exactly remember why I marked these as 75% off, but I'm going to trust my past self's judgment. |
Roll for the Galaxy | Dice Guide set of 5 | 90% | RFTG90A | 2 | This 5-pack is just single-layer phase guides; no columns to sort your dice. |
Roll for the Galaxy | Dice Guide set of 5 | 90% | RFTG90B | 1 | A mixed pack of early prototypes; functional, although a couple are just the phase guide, with no columns to sort the dice. |
Splendor | Expansion Storage Box | 25% | SPEXP25 | 1 | This is a prototype that I've made some minor adjustments to, but it's still fully functional. Fully assembled. |
Splendor | Expansion Storage Box | 50% | SPEXP50 | 1 | This is a prototype. I've made some adjustments to this design, but it's essentially the same as the final product. Fully assembled. |
Splendor | Expansion Storage Box | 75% | SPEXP75 | 1 | An earlier prototype version with a different method of storing the strongholds, and some other differences throughout the product. Might take a little fiddling to make everything fit right. Fully assembled. |
Splendor | Storage Box | 25% | SPLEN25 | 2 | I needed to do a second cutting pass on this, but the pass was misaligned. As a result, all of the edges have a second cut a little bit inside. Still perfectly functional, and fully assembled. |
Terra Mystica | Player Board Overlays – Set of 3 | 75% | TMYS75 | 1 | These are marked as prototypes. At this point, I've forgotten what I changed about them, but they should be functional, but not perfect. Add three Player Board Overlays to your order, then use this coupon code. |
Terraforming Mars | Player Area Overlay | 25% | TMARS25A | 3 | The acrylic here has some off-colored spots. Honestly, it's barely even visible unless you hold it up to the light. |
Terraforming Mars | Player Area Overlay | 25% | TMARS25B | 1 | A design error made one of the dividers between resource spaces thinner than it should be. It's potentially fragile, otherwise works fine. |
Terraforming Mars | Player Area Overlay | 50% | TMARS50 | 2 | This is an older version; specifically, it only has a '10' spot for credit income instead of my current '10, 20, 30' spots. |
Terraforming Mars | Player Area Overlay | 75% | TMARS75A | 1 | This is an older version; specifically, it only has a '10' spot for credit income instead of my current '10, 20, 30' spots. You'll need to peel the acrylic and glue it together yourself with white glue. |
Terraforming Mars | Player Area Overlay | 75% | TMARS75B | 1 | This is an older version; specifically, it only has a '10' spot for credit income instead of my current '10, 20, 30' spots. It's cracked in one spot. |
Twilight Imperium 3E | Galaxy Frame | 25% | TI325 | 9 | The edge engraving should have a nice fade from white to black, but these came out a little different. You might even like the look, but if you order frame extensions later, they'll be visibly different. You can always remove the backing and flip them over for a pure black appearance. |
Twilight Imperium 3E | Galaxy Frame | 90% | TI390 | 4 | An early version, made of wood. Stained black, same size, probably more durable than the acrylic. 3rd edition. |
Twilight Imperium 3E | Galaxy Frame + 7-8 player extensions | 25% | TI3EX25 | 5 | The edge engraving should have a nice fade from white to black, but these came out a little different. You might even like the look, but if you order frame extensions later, they'll be visibly different. You can always remove the backing and flip them over for a pure black appearance. |
Twilight Imperium 4E | Galaxy Frame | 25% | TI425 | 6 | The edge engraving should have a nice fade from white to black, but these have a harder edge. You might even like the look, but if you order frame extensions later, they'll be visibly different. You can always remove the backing and flip them over for a pure black appearance. |
Twilight Imperium 4E | Galaxy Frame | 50% | TI450 | 2 | A prototype from when I was testing and getting the fit right. This one was labeled 'Pretty Good' |
Twilight Imperium 4E | Galaxy Frame | 75% | TI475 | 8 | A prototype from when I was testing and getting the fit right. This one was labeled 'Tight' |
Twilight Imperium 4E | Galaxy Frame | 75% | TI475B | 5 | A prototype from when I was testing and getting the fit right. This one was labeled 'Poor Engraving' |
Twilight Imperium 4E | 7-8 player extensions | 25% | TI4EX25 | 1 | The edge engraving should have a nice fade from white to black, but these have a harder edge. You might even like the look, but they won't match a standard frame. You can always remove the backing and flip them over for a pure black appearance. |
Twilight Imperium 4E | Galaxy Frame + 7-8 player extensions | 75% | TI4EX75B | 1 | A prototype from when I was testing and getting the fit right. This one was labeled 'Poor Engraving' |
XCOM: The Board Game | Box insert and frame | 50% | XCOM50 | 1 | This was my set, before the expansion came out. Complete and functional for a non-expansion game. Fully assembled. |
XCOM: The Board Game | Acrylic frame around the board | 75% | XCOM75B | 1 | This was a near-final prototype, pre-expansion, but I've made some minor tweaks. Should be just fine for a pre-expansion game. |